# $Id: pnpdump.c,v 1.17 1998/11/10 22:45:04 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR # # Trying port address 0203 # Board 1 has serial identifier d7 ff ff ff ff 03 00 73 16 # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) (VERBOSITY 2) (CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING # Card 1: (serial identifier d7 ff ff ff ff 03 00 73 16) # Vendor Id ESS0003, No Serial Number (-1), checksum 0xD7. # Version 1.0, Vendor version 1.0 # ANSI string -->ESS ES1869 Plug and Play AudioDrive<-- # # Logical device id ESS0006 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3d # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS0003/-1 (LD 0 # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ff8 # IO base alignment 8 bytes # Number of IO addresses required: 8 (IO 0 (SIZE 8) (BASE 0x0800)) (NAME "ESS0003/-1[0]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # # Logical device id ESS1869 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS0003/-1 (LD 1 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode (DMA 0 (CHANNEL 1)) # Next DMA channel 0 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode (DMA 1 (CHANNEL 0)) # IRQ 5. # High true, edge sensitive interrupt (by default) (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 0 bytes # Number of IO addresses required: 16 (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 0 bytes # Number of IO addresses required: 2 (IO 2 (SIZE 2) (BASE 0x0330)) # Start dependent functions: priority acceptable # First DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 1)) # Next DMA channel 0 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9 or 10. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0240 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0300)) # Start dependent functions: priority acceptable # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0330 # IO base alignment 48 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0300)) # Start dependent functions: priority acceptable # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 0 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0800)) # Start dependent functions: priority functional # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed in compatible mode # (DMA 1 (CHANNEL 0)) # IRQ 5, 7, 9, 10, 11 or 12. # High true, edge sensitive interrupt (by default) # (INT 0 (IRQ 5 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 32 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffc # IO base alignment 4 bytes # Number of IO addresses required: 4 # (IO 1 (SIZE 4) (BASE 0x0800)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0800 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 2 (SIZE 2) (BASE 0x0800)) # End dependent functions (NAME "ESS0003/-1[1]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # # Logical device id ESS0001 # Device supports vendor reserved register @ 0x3a # Device supports vendor reserved register @ 0x3c # Device supports vendor reserved register @ 0x3d # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE ESS0003/-1 (LD 2 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0201 # IO base alignment 0 bytes # Number of IO addresses required: 1 (IO 0 (SIZE 1) (BASE 0x0201)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0200 # Maximum IO base address 0x020f # IO base alignment 1 bytes # Number of IO addresses required: 1 # (IO 0 (SIZE 1) (BASE 0x0200)) # End dependent functions # Compatible device id PNPb02f (NAME "ESS0003/-1[2]{ESS ES1869 Plug and Play AudioDrive}") (ACT Y) )) # End tag... Checksum 0x00 (OK) # Card 1: (serial identifier 81 ff ff ff ff 20 00 a8 65) # Vendor Id YMH0020, No Serial Number (-1), checksum 0x81. # Version 1.0, Vendor version 0.0 # ANSI string -->OPL3-SA3 Sound Board<-- # # Logical device id YMH0021 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 0 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 16 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0530 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 2 (SIZE 8) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 3 (SIZE 2) (BASE 0x0330)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0370 # Maximum IO base address 0x0370 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 4 (SIZE 2) (BASE 0x0370)) # IRQ 5. # High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 0 (CHANNEL 0)) # Next DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 1 (CHANNEL 1)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0240 # Maximum IO base address 0x0240 # IO base alignment 16 bytes # Number of IO addresses required: 16 # (IO 0 (SIZE 16) (BASE 0x0240)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0e80 # Maximum IO base address 0x0e80 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 1 (SIZE 8) (BASE 0x0e80)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 2 (SIZE 8) (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0300 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 3 (SIZE 2) (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 4 (SIZE 2) (BASE 0x0100)) # IRQ 5, 7, 9, 10 or 11. # High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 1 (CHANNEL 0)) # Start dependent functions: priority functional # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 16 bytes # Number of IO addresses required: 16 (IO 0 (SIZE 16) (BASE 0x0230)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0f48 # IO base alignment 8 bytes # Number of IO addresses required: 8 (IO 1 (SIZE 8) (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x03f8 # IO base alignment 8 bytes # Number of IO addresses required: 8 (IO 2 (SIZE 8) (BASE 0x0390)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0334 # IO base alignment 2 bytes # Number of IO addresses required: 2 (IO 3 (SIZE 2) (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 (IO 4 (SIZE 2) (BASE 0x0100)) # IRQ 3, 5, 7, 9, 10 or 11. # High true, edge sensitive interrupt (INT 0 (IRQ 3 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F (DMA 1 (CHANNEL 3)) # End dependent functions (NAME "YMH0020/-1[0]{OPL3-SA3 Sound Board}") (ACT Y) )) # # Logical device id YMH0022 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 1 # Compatible device id PNPb02f # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0201 # IO base alignment 1 bytes # Number of IO addresses required: 1 (IO 0 (SIZE 1) (BASE 0x0201)) # Start dependent functions: priority functional # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0211 # IO base alignment 16 bytes # Number of IO addresses required: 1 # (IO 0 (SIZE 1) (BASE 0x0201)) # End dependent functions (NAME "YMH0020/-1[1]{OPL3-SA3 Sound Board}") (ACT Y) )) # Returns all cards to the "Wait for Key" state (WAITFORKEY)